60" - 65" Full-Auto Hot Cold Laminting Machine Large Format Laminator - Pick UP

Description

110V 60" / 64" / 65" Full-Auto Hot Cold Laminator Wide Format Laminting Machine
Type A (item ID:
384202047402
)
Description:
Model
SEC-010
Maximum Laminator Width
1520mm (60")
Roller’s Diameter
130mm (5")
Maximum Laminating Thickness
25mm (0.99")
Maximum Heating Temperature
when hot laminating, the temperature is 50~60 degree, the highest
temperature is 60 degree.
Laminating Speed
From
0 to 10m (393")
per minute
Preheating Time
5 - 10mins
Power Consumption
0.3 - 0.5KW / h
Power Input
2200W
Height Adjust
Single side lifting link
Motor Forward / Reverse
Yes
Floor Stand
Yes
Auto Rewind Liner Pickup
Yes
After Laminating Pickup
Yes
Emergency Stops
Yes
Safety Photocell
Yes
Power Supply
AC110V, 50 / 60Hz
Features:
Adopts low temperature cold laminating, mainly used to solve the issue that cold laminated images are hazy.
Stainless steel feeding table
130mm (5") upper rubber roller
Auto – take – up system
Anti – tilt and anti – fold device (Origin)
Pressure and height adjust hand wheel
Infrared temperature control device
Type B (item ID:
384105996873
)
Description:
This 60" Full - auto Low Temp
Wide Format
cold laminator
with Stand can be widely used for pre - masking vinyl graphic, mount prints on substrate, over laminating inkjet prints and so on.
The cold laminator is used to after printing. Available for photographic, Ad. Shop and copy shop to do lamination work, adding a protective layer on books cover, photographic, color pages, documents, charts, drawings, indoor advertising products, etc.
This laminator 1600x3 is low heated cold laminator
with liner and without
liner, a wide range of application.
It can be used
cold laminating
with low temperature, to strip coil backing paper,to roll picture
automatically.
Cold roll laminators are the perfect option for someone looking to enter the wide format graphics market. Equipped with all of the features needed to produce most applications,cold roll laminator promises quality, performance and safety – at an affordable price.
• Great for mounting prints to boards
• Over laminating digital prints
• Applying application tapes, applying double side adhesives and vinyl
•
It’s multiple-function,easy operation and high efficiency.
Model
SEC-039
Maximum Laminator Width
1520mm (60")
Roller’s Diameter
130mm (5")
Maximum Laminating Thickness
30mm (1")
Temperature Range
0- 60 degree.
Laminating Speed
From
0 to 20m
per minute
Enhance Way
5 - 10mins
Power Consumption
Pneumatic
Power Input
1850W
Packing Size
220cm x 77cm x 76cm
Motor Forward / Reverse
Yes
Floor Stand
Yes
Auto Rewind Liner Pickup
Yes
After Laminating Pickup
Yes
Emergency Stops
Yes
Safety Photocell
Yes
Power Supply
AC110V, 50 / 60Hz
Advantages and Features:
•
Adopts low temperature cold laminating, mainly used to solve the issue that cold laminated images are hazy.
Stainless steel feeding table
•
Auto – take – up system
•
Anti – tilt and anti – fold device (Origin)
•
Pressure and height adjust hand wheel
•
Infrared temperature control device
•
Multi-position jog/foot Switch control
•
One key stop/easy to operate
• Stable / without
wrinkle when laminating
• With 3pcs new designed cutting Knife ,Laminating and cutting in 1,Makes it more convenience ,safety and
high       efficiency
•
Chassis mold is formed at one time,perfect appearance
Type C (item ID:
384092862322)
Specification:
Model:
1650H6
Max Laminate Width:
1630mm / 64"
Max Laminate Thickness:
30mm
Laminate Speed:
0-30m/min
Lifting Way:
Pneumatic
Working Way:
Auto
Rated Input Power:
0.8-1.0kw/h
Continuous Power:
1850W
Temperature Range:
0-60℃
Rated Input Voltage:
110V
Packing Size:
219*76*79cm
NW/GW:
205kg / 225kg
Advantages and Features:
1. Reduce the cost, improve quality:
Good color reductibility; High transparency; No air bubbles.
2. High efficiency coated film, high yield:
Coated the whole volume 50m, don't walk inclined, can realize single or unmanned operation; 220 square/hour, Thin back glue not wrinkle, brunet picture of the prison coated film.
3. Can be used for low heating cold lamination:
50 degrees cold framed can completely avoid bubble, snow point phenomenon automatioc open under paper function, can realize single or unmannned 400 square/hour.
Type D (item ID:
383807497423
)
Description:
It is a 1.72m/67 wide format full-auto hot and
cold laminator
designed as an inexpensive option for a wide range application.
An ideal laminating solution for Use matte or gloss thermal films can save your cost during hot lamination.
The numerous features included with the 65in wide format hot and cold laminator make it so easy to use finishing becomes one person.
It can realize
both cold and hot laminating
,to strip coil backing paper,to roll picture automatically.
Especially when work in
cold laminating conditions,it will improve the coating effect.
The main features
of this machine is that the operation is easy,loading and unloading fast,multifunction .
Advantages and Features:
1. Temperature and speed can be adjusted freely.
2. Anti-strike oblique tension adjustable mechanism.
3. Sheet metal intergrated design, stable structure.
4. Increase silicone roll, long service life
5. Standard with 3 cutting knives, infrared anti-pinch hand.
5. Available crystal film, yellow paper film, paperless film.
6. The machine is equipped with a meter, which can accurately record rice without wasting materials.
7. The first use of smart color screen.
SHIPPING
Shipping FAQs
Where does the laminator ship from?
The laminator will ship out from our CA shipping center.
How soon can you ship out the laminator?
We usually ship out the laminator in 3-5 business day.
(Except holidays)
How long does it take to receive the laminator?
It usually takes about 1-7 business depends your location. (For lower 48 states only)
e.g:
Most of locations in
California
, will receive the machine in 1 or 2 business days.
Most of locations in
Florida
, will receive the machine in 5 or 6 business days.
Can I track the shipping status online?
Yes, we will forward you the tracking information once shipped.
Do you ship to residential address'?
Yes, we do.
Do you ship to PR, AK, and HI?
No,we dont
Do you ship overseas?
Yes, we do.
SHIPPING
1.We will ship your item by FedEx, DHL, UPS, EMS, e-Package etc with the tracking number showed on ebay.
2.Your item will be shipped within 1-3 working days after clear payment .
3.The shipping time varies. If by FedEX, DHL,or UPS, 3-4 business days to USA,5-7 business days to other most countries.
If by e-packet,7-15 days to USA,and 2-4 weeks to other most countries.
4.Due to the local dispatch or other reasons, sometimes the shipping time will be delay. Please kindly understand Uncertainties by the delivery company. We will track the item all the time until it is reached to you.
PAYMENTS
1. we accept: Paypal and some other payment method.
2. We will very appreciate if you can pay for the order after your ordering within 1-3 working days so that we can provide you the best services.
3. Please list your special requests in Note after payment. (color, packages, etc.)
Feedback
1.If you have any problems or concerns to your order or products, please message us and give us a chance to assist before you leave negative feedback.
2.We believe that we can produce a positive outcome to any situation to earn your like
s.
3.Your satisfaction is guaranteed.